Are you

Design and implementation of an IoT-Based diabetes remote monitoring system


Real-time diabetes remote monitoring uses Internet of Things (IoT) technology to measure blood glucose levels, heart rate, blood pressure, and body temperature. Typically, a self-management system for diabetes is designed to detect the presence of particular molecules, particularly hyperglycemia, together with other diabetes-related indicators. We talked about and examined the information gathered by biological sensors. IoT communication protocols have been used to filter data and send detected data to the cloud using a microcontroller (Arduino Uno).

To manage and link patients with their doctors, an IoT-based webapplication has been created and connected to a Node-Red dashboard. Physicians can assist patients in real time via a dashboard with an easy to use interface based on readings gathered by sensors. The earlier researchers introduced the use of mHealth, an Internet of Things (IoT) system that combines computers and mobile phones with sensor-based technology. The system was created and validated so that doctors could access patient data through a web-based and mobile application. The use of a remote monitoring system for diabetes is a technique for the careful control of the condition, which can develop as a result of high blood sugar. Doctors assisted the patients, and they had access to their input via the patient panel of the program, their e-mail accounts, as well as by phone call. The literature that is now available demonstrated that excessive blood glucose levels are linked to a variety of complex dangers, including stroke and heart conditions such as cardiovascular diseases.

This study benefits the healthcare industry by bridging the real-time healthcare gap that existed between doctors and patients, which may result in fatalities. This Diabetes Remote Monitoring System (DRMS) runs intelligently by anticipating linked devices in the healthcare sector for diabetic patients. The thesis concentrated on how IoT devices might help diabetics maintain the aforementioned criteria. We saw real-time data transfer from the patient to the professionals based on the findings. When fasting, diabetics are in a serious condition if their blood sugar levels are 80 to 139 mg/dl, >85 bpm, 120 to 180 mmHg (systolic), 80 to 120 mmHg (diastolic), 36 to 37.9 oC, or 37.9 oC, respectively. Real-time measurements have been used to evaluate the Correct Dose Insulin computation.

Related project idea for free


Smart Attendance system by using RFID card

Smart Attendance system by using RFID card

In this century has shown tremendous advance and rapid change in technology, where the world is going in digital system. Many researchers are concentrating on how they can be part of the above stated changes; the work presented in this report focuses on the use of electronic system to make job ea...

Read more>>

Vehicle tracking and management system

The aim of this project deals with the “vehicle tracking and management system”. This system will be used for recording daily activities such as tracking your vehicles in different locations, they should be moving from one location to another. This vehicle tracking system will be able to track the m...

Read more>>

IoT Based Electricity Energy Meter by using ESP12 and Arduino

We are all familiar with electricity energy meters, which are installed in every home or office to measure electricity consumption. Many of us are concerned about our high electricity bills at the end of each month, and we must periodically check the energy meter. But what if we could monitor our el...

Read more>>

IoT Based Patient Health Monitoring System using ESP8266

In today's world, health monitoring is a major issue. Patients suffer from serious health problems as a result of a lack of proper health monitoring. There are many IoT devices available these days to monitor a patient's health over the internet. Health professionals are also using these smart devic...

Read more>>

Forest Fire Detection System using Arduino and GSM Module - IoT Based Project

Forest fires are common hazards in forests that harm both wildlife and the environment. It could be avoided if a strong system was deployed in forest areas to detect fires and alert firefighting authorities to take immediate action. The goal of this project is to create an IoT-based forest fire dete...

Read more>>