IoT Based Electricity Energy Meter by using ESP12 and Arduino

We are all familiar with electricity energy meters, which are installed in every home or office to measure electricity consumption. Many of us are concerned about our high electricity bills at the end of each month, and we must periodically check the energy meter. But what if we could monitor our electricity consumption from anywhere in the world and receive an SMS/E-mail when it reaches a certain threshold? Here, we are constructing an IoT-based Energy Meter Project. In this project, we build a Smart Electricity Energy Meter with Arduino and an ESP8266 Wi-Fi module that not only sends you an SMS/Email of your electricity bill, but also allows you to monitor your energy usage at any time and from anywhere in the world. We used a Current Sensor ACS712 to measure energy consumption. Arduino UnoESP12/NodeMCUAny AC ApplianceACS712-30Amp Current sensorPCB

Related project idea for free

TEMPERATURE AND FACE DETECTION SYSTEM

The measured amount of heat in a place or in the body is called temperature whereas face is the front of the head, where the eyes, nose and mouth are. By using face detection, you can recognize someoneâ€™s identification. Temperature can be used as the sign of change in human body. In corona virus/c...

Vehicle collision avoidance IOT system

Driver-assistance systems called collision avoidance systems, sometimes known as crash avoidance systems, use sensors and algorithms to identify possible hazards or obstructions and issue alerts to the driver to help prevent a collision. A collision avoidance system is a type of safety device used t...

Household pollution monitoring and prediction system using IOT

Indoor pollution has become a concern all over the world. The means of source of fire in low-income and middle-income countries use firewood, charcoal, and liquefied petroleum gas (LPG) for cooking daily. According to the world health organization, an estimated 1.6 million people die annually due to...

Smart airtime vending machine

The most important intention of this thesis includes undertaking modern technology by designing and implementing a smart airtime vending machine known as a self-service airtime vendor machine that will come as an additional method apart from the current airtime selling and buying methods which are m...

IoT-based conversational AI Recommender assistant for vital sign predicted anomalies

In most real-time scenarios such as emergency first response or a patient self-monitoring using a wearable device, it is likely that accessing a healthcare physician for assessing potential vital sign anomalies and providing a recommendation will be impossible; thus potentially putting the patient a...