• Heater power: 30w


• Insulation class: e class


• Material: Plastic, Metal


• Working mode: continuous


• Size: 245mm*30mm (length and width)


• Electromagnetic power: 350w (instantaneous)


• Working voltage : 220v EU plug

Features

Using 110/220V 50hz power supply, power 30W.

Turn on the power and preheat for 3-5 minutes.

When soldering, the operation is the same as that of a soldering iron; it can be used for both soldering and absorbing tin.

The can suction unit is equipped with two suction nozzles of different diameters, depending on the thickness of the lead parts.

Press the piston handle, and align the tin suction nozzle to the welding piece; after the can is melted, press the control button, and the welding seam is sucked into the cylinder.

When disassembling the cylinder, press down the top of the cylinder in the direction of the arrow, and pull the cylinder and handle at the same time, the cylinder can be separated; when disassembling the suction nozzle, turn the suction nozzle counterclockwise and remove it.